Анкета-1121(Иерусалим)
Objective:
Electronics and Communication Engineer position to utilize my working experience in design and development FPGA/CPLD/ASIC. Professional Profile:
• Experienced in FPGA and DSP programming state-of-the-art systems using the latest chip products
• Extensive knowledge and skills in the analysis and development of Synthesized Coding Style/RTL (Register Transfer Level) subset.
• Skilled in reusable IP (Intellectual Property) and SoC(System-on-a-Chip).
• Real Time Multidisciplinary Systems.
• Peripherals, I2C, SPI, SDRAM.
• Embedded Systems, Image Processing, Communication.
• Proficient in the operation of HDL (hardware description language) and EDA in testing deferent types of modules/blocks hardware prototype.
• Extensive knowledge of Test Bench Environment and VLSI design tools.
• Knowledgeable in Signal Integrity in Board Design with FPGA.
• Signal Quality, Product Integration, Verification and Validation.
Hardware and Software IDE:
Software: OrCAD,Mentor Graphics Corporation(Hyperlynx, Modelsim,
Precision),ALTERA(Quartus), XILINX(ISE)
Languages: VHDL,Verilog,C
OS Platforms: MS-DOS, Windows 9x/2000/XPProfessional Experience:
2008 -2009 SLAM Embedded Ltd. FPGA Design Engineer
Developing Hardware Design of SoC:
• Created algorithm of system.
• Designed RTL for memory controller with SPI interface.
• 32-bit microcontroller.
• DRAM-FIFO Controller.
• Communication system PC-SoC.
• Integration Digital and Analog parts.
• Responsible for identifying and resolving various bugs
found in the design and testbench. Created random
simcases which performed exhaustive testing and was also leveraged
for functional coverage.
2007-2008 SLAM Embedded Ltd. FPGA Design Engineer
Developing Hardware Design of DSP-based control for Opto-MEMS technology:
DSP-based control for MEMS system.
DSP-based control for Laser system.
SDRAM Interface.
2006-2007 SLAM Embedded Ltd. Hardware Developer
Embedded Controller Virtex4
1. I2C interface.
2. Controller PWM.
3. Serial Communication Interface (SCI).
4. 16-bit microcontroller (MCU).
5. Verified and simulated the output new VHDL design paradigm
for hardware "Virtex4".Hardware Design Video Processor in Real Time
1. Managed and reported the detailed project implementation to meet business objectives.
2. Created high-level representations of a circuit data transfer between hardware registers.
3. Validated signal processing.
4. Provided verification, simulation and synthesis of signal input/output.
5. Executed design for divers-scale integrated (VLSI) devices.Video Processor queue processing
1. Managed and lead ED Staff to determine the requirements and methodologies for SDRAM-FIFO hardware improvement.
2. Analyzed business practices and processes, and recommended changes for new development of SDRAM and FIFO controllers.
3. Was involved in preparation and integration of new design SDR SDRAM-FIFO hardware in Real Time.
4. Verified and simulated the output new VHDL design paradigm for hardware "Cyclone II".PWM Generator- Controller LED
1. Conducted next-step implementation to construct specifications for a hardware paradigm.
2. Assisted staff in the understanding a new PWM.
3. Lead the design of a new VHDL (ModelSim 6.2f) module to build required circuits.
4. Recommended new complex data processing solutions.
Bus Controllers Interfaces CAN ISO15765; ISO9141; ISO14230; SAIJ1850.
1. Developed the test strategy for new diagnostic bus controller devices.
2. Prepared documentation and diagrams for the development of a new simulation test bench schema.
3. Lead design, development and integration of a new frame-work simulation for upgrading new bus controller devices.1994-2006 "EGGED" Electrical Engineer
1. Maintained, upgraded and repaired electrical and electronic bus system controllers.
1993-1994 "Bait Le-Kol" Technician
1. Upgraded and repaired Radio repair TV and Audio Professional devices. Courses:
Sela Group.Com Ltd.
Course "Board Design, PCB Design."
1. Board Design.
2. PCB Design.
3. Signal & Power Integrity.
Education:
1986-1990
The City College of Enterprise Technologies, Ukraine
"Technical Engineering in EES (Electrical Enterprise System)", diplomaLanguages:
Hebrew, English, RussianReferences are available upon request.
Electronics and Communication Engineer position to utilize my working experience in design and development FPGA/CPLD/ASIC. Professional Profile:
• Experienced in FPGA and DSP programming state-of-the-art systems using the latest chip products
• Extensive knowledge and skills in the analysis and development of Synthesized Coding Style/RTL (Register Transfer Level) subset.
• Skilled in reusable IP (Intellectual Property) and SoC(System-on-a-Chip).
• Real Time Multidisciplinary Systems.
• Peripherals, I2C, SPI, SDRAM.
• Embedded Systems, Image Processing, Communication.
• Proficient in the operation of HDL (hardware description language) and EDA in testing deferent types of modules/blocks hardware prototype.
• Extensive knowledge of Test Bench Environment and VLSI design tools.
• Knowledgeable in Signal Integrity in Board Design with FPGA.
• Signal Quality, Product Integration, Verification and Validation.
Hardware and Software IDE:
Software: OrCAD,Mentor Graphics Corporation(Hyperlynx, Modelsim,
Precision),ALTERA(Quartus), XILINX(ISE)
Languages: VHDL,Verilog,C
OS Platforms: MS-DOS, Windows 9x/2000/XPProfessional Experience:
2008 -2009 SLAM Embedded Ltd. FPGA Design Engineer
Developing Hardware Design of SoC:
• Created algorithm of system.
• Designed RTL for memory controller with SPI interface.
• 32-bit microcontroller.
• DRAM-FIFO Controller.
• Communication system PC-SoC.
• Integration Digital and Analog parts.
• Responsible for identifying and resolving various bugs
found in the design and testbench. Created random
simcases which performed exhaustive testing and was also leveraged
for functional coverage.
2007-2008 SLAM Embedded Ltd. FPGA Design Engineer
Developing Hardware Design of DSP-based control for Opto-MEMS technology:
DSP-based control for MEMS system.
DSP-based control for Laser system.
SDRAM Interface.
2006-2007 SLAM Embedded Ltd. Hardware Developer
Embedded Controller Virtex4
1. I2C interface.
2. Controller PWM.
3. Serial Communication Interface (SCI).
4. 16-bit microcontroller (MCU).
5. Verified and simulated the output new VHDL design paradigm
for hardware "Virtex4".Hardware Design Video Processor in Real Time
1. Managed and reported the detailed project implementation to meet business objectives.
2. Created high-level representations of a circuit data transfer between hardware registers.
3. Validated signal processing.
4. Provided verification, simulation and synthesis of signal input/output.
5. Executed design for divers-scale integrated (VLSI) devices.Video Processor queue processing
1. Managed and lead ED Staff to determine the requirements and methodologies for SDRAM-FIFO hardware improvement.
2. Analyzed business practices and processes, and recommended changes for new development of SDRAM and FIFO controllers.
3. Was involved in preparation and integration of new design SDR SDRAM-FIFO hardware in Real Time.
4. Verified and simulated the output new VHDL design paradigm for hardware "Cyclone II".PWM Generator- Controller LED
1. Conducted next-step implementation to construct specifications for a hardware paradigm.
2. Assisted staff in the understanding a new PWM.
3. Lead the design of a new VHDL (ModelSim 6.2f) module to build required circuits.
4. Recommended new complex data processing solutions.
Bus Controllers Interfaces CAN ISO15765; ISO9141; ISO14230; SAIJ1850.
1. Developed the test strategy for new diagnostic bus controller devices.
2. Prepared documentation and diagrams for the development of a new simulation test bench schema.
3. Lead design, development and integration of a new frame-work simulation for upgrading new bus controller devices.1994-2006 "EGGED" Electrical Engineer
1. Maintained, upgraded and repaired electrical and electronic bus system controllers.
1993-1994 "Bait Le-Kol" Technician
1. Upgraded and repaired Radio repair TV and Audio Professional devices. Courses:
Sela Group.Com Ltd.
Course "Board Design, PCB Design."
1. Board Design.
2. PCB Design.
3. Signal & Power Integrity.
Education:
1986-1990
The City College of Enterprise Technologies, Ukraine
"Technical Engineering in EES (Electrical Enterprise System)", diplomaLanguages:
Hebrew, English, RussianReferences are available upon request.
